H-310 interface

Datasheet:

Main task of the H-310 network interface is to allow a PC computer access to the HYBRYD emergency lighting luminaire network.
The H-310 network interface is equipped with a 10/100Mbps Ethernet port and may be connected directly or indirectly by the means of a network switch to a computer. It is also equipped with two output channels of which one may be used for direct luminaire connection and the other to connect luminaires over H-311 network expanders. The H-310 network interface has two independently working communication ports. The first one can operate as CT for the required CT-BUS (PORT2), the second one can operate only as CT-BUS (PORT1).

TECHNICAL DATA

Supply voltage	230V AC 50/60Hz
Power consumption	< 8VA
Power factor	0,5
Protection class	II
Ingress protection	IP20
Maximum bus length	CT - 1000m CT-BUS, CT-LOOP - 1200m
Battery	Li-Ion 3,7V / 2,2Ah
Emergency operation time	>3h
Network topology	1x CT or 2x CT-BUS 1x CT-LOOP ¹⁾
Ambient temperature	+5ºC – +35ºC
Installation kind	DIN rail, 4M; Wall ²⁾
Power supply cable	0,5 – 1,5mm²
Housing	PC/ABS

¹⁾ Possible configuration in the software
²⁾ Power supply terminal must be covered by means of a cable tray

CONSTRUCTION

• The device consists of an ETHERNET interface and a built-in H-311 network expander
• Device elements are placed in a modular housing designed for mounting on a DIN rail or on the wall
• Supplied using two cables (L, N), cable cross section area 0,5 – 1,5mm², supply voltage 230V AC 50-60Hz
• Internal Li-Ion battery guarantees more than 3 hours of operation without external power
• On the front of the H-310 unit a label with the built-in network expander MAC address and ETHERNET interface MAC address is placed.