- OWA ALSU
OWA ALSU
Files:
Datasheet: | Download |
Manual: | Download (AT CT) Download (CB CBAM LV LVAM) |
CNBOP: | Download |
Photometric data: | Download |
Hygienic certificate: | Download |
Description:
OWA ALSU is a high efficiency surface mounted LED luminaire designed for emergency lighting. Its main task is to illuminate escape routes, evacuation signs, rooms in public facilities, work places, etc.A powder coated extruded aluminum housing and an optional glass diffuser allow to use OWA ALSU in difficult atmosphere conditions.
FEATURES:
• Deep discharge battery protection• Non-maintained, switched maintained or night operation mode
• Possibility to connect to the central management system, central power supply or group power supply
• Lighting of escape routes, open spaces and fire point
• Small housing made of aluminum
• Does not emit silicone and is resistant to unusual conditions in the building
• Wide range of optics
• Variant 0002 with extended range temperature available (only for 1 hour of emergency operation time)
AVAILABLE SYSTEMS:
AUTOTEST – internal components, battery and light source tests being performed automaticallyCENTRALTEST – internal components, battery and light source tests being performed on command from the main unit of central management system
CB – luminaire supplied from HVCBS (230V AC / 216V DC / 108V DC), without address module
CBAM – luminaire supplied from the HVCBS (230V AC / 216V DC), with built-in address module
LVAM – luminaire supplied with 24V DC from the LVDBS system, with built-in address module
MATERIAL:
Housing material – powder coated aluminumHousing colour – q RAL 9003, q RAL 9006, q RAL 9005, other on special order
Lamp shade material – PMMA (or glass – special variant 0104)
AVAILABLE OPTICS
SIDE – (SD) light distribution directed to one side, for wall mounting, spot illuminatingAREA – (AR) symmetrical light distribution in all directions, recommended for use in places of considerable height or to illuminate fire points
ROAD – (RO) symmetrical light distribution in all directions, ensuring adequate illumination on a large area
ROAD PLUS – (RP) light distribution mainly along the escape route with a much greater range than for the ROAD optics, for small heights
Technical data:
Supply voltage | AT, CT | 230V AC 50/60Hz | |
---|---|---|---|
CB | 230V AC 50/60Hz80–275V DC | ||
CBAM | 230V AC 50/60Hz170–275V DC | ||
LVAM | 10–32V DC | ||
Protection class | AT, CT, CB, CBAM | I | |
LVAM | III | ||
Ingress protection | IP65 | ||
Light source | LED module 1) | ||
Light source lifespan | > 50 000h | ||
Light colour temperature 5700K | |||
Colour rendering index | 70 | ||
Light source supply power | 3W | ||
Minimum luminous flux | AR | 282lm | |
SD | 321lm | ||
RO | 321lm | ||
RP | 325lm | ||
Battery voltage | Ni-MH | 4.8V | |
Battery capacity | Ni-MH | 1.6, 2.1, 4.0Ah | |
Battery recharging time | AT, CT | < 24h | |
Emergency operation time | AT, CT | 1h, 3h | |
Ambient temperature | AT, CT | +5 – +40˚C;TE:2) -20 – +40˚C 3) | |
CB, CBAM | -10 – +40˚C;TE: 2) -25 – +45˚C | ||
LVAM | -25 – +50˚C | ||
Supply cable cross-section area | 0.5 – 2.5mm² | ||
Supply cable diameter | ≤ 8mm | ||
Communication cable diameter | ≤ 6mm | ||
Through wiring | ✕ | ||
Suitable for surface wiring | ✕ |
2) TE – extended temperature range
3) Available only for 1 hour of emergency operation time